Platform · Epsilon1 Design Package
The whole board, licensed, so you can build it yourself.
Schematic, PCB, custom symbol and footprint libraries, orderable BOM, fabrication outputs and firmware reference for the Epsilon1 terminal — licensed to you as a starting point rather than a finished product.
Epsilon1 Design Package
- Typical length
- immediate
- What you get
- 7 written deliverables, listed below
- What decides the number
- Licence scope. Internal use at the floor; rights to manufacture and resell under your own brand are quoted separately.
- Scoping
- One call, then a written scope. We say no when it is not ours.
Contact salesGet a quote
01 The terms
Quoted per project, after a call. We do not publish a band for this, because a number without a scope is a guess and you would have to unpick it later anyway.
Tell us what the work has to do and when it has to be done, and you get the scope and the number in writing — or a straight answer that this is not ours.
03 The problem
You need an industrial terminal — a screen, a serial bus, RFID, a printer, an offline queue — and designing one from nothing is two months you would rather spend on the thing that makes your product different.
The alternative is usually a stack of dev boards in a box, which works on a bench and not in a field.
04 What you get
- KiCad 9 schematic and PCB for the 120 × 120 mm Epsilon1 board
- Custom symbol and footprint libraries drawn from manufacturer datasheets
- Orderable BOM with distributor part numbers and qualified alternates
- Fabrication package — Gerbers, Excellon drill, assembly notes
- Pin-to-pin netlist documentation
- Firmware reference: offline queue, RS485 framing and resynchronisation, OTA pattern
- A licence that lets you modify it
05 How it runs
- On purchase
- Licence agreed, repository access granted the same day.
- Optional
- A paid handover call, and Board-to-Fab if you want it adapted for you.
06 Whether this is for you
This is for you if
- Integrators who want a proven terminal rather than a design project
- Teams with firmware skills and no hardware engineer
- Anyone building a vertical on an industrial edge device
This is not for you if
- Anyone expecting support. This is a design package, not a product — support is a separate engagement.
- Production-ready assembly. You still have to fabricate, assemble and test it.
- Resale under your own brand without agreeing those rights first
07 Proof
This is the board in eFuelPro: two-layer FR4, five peripherals across two SPI buses, I²C, two UARTs and USB-CDC, ground pours on both layers, in the field rather than in a drawer.
08 Questions
Do I get the eFuelPro fuel application too?
No. That is the vertical and it stays ours. You get the terminal and the reference firmware it is built on.
Can I manufacture and sell it?
With a resale licence, yes. Ask and we will quote it.
Next immediate
Epsilon1 Design Package
Tell us what the work has to do and when it has to be done. You will get a person who has read it, not a sequence.